ClickCease
SWAMP WS-100 Studio Production Mixing Mastering Desk Workstation
BLACK FRIDAY SALE ON NOW - SAVE SITEWIDE

SWAMP WS-100 Studio Production Mixing Mastering Desk Workstation

$689.99
  Sold Out
or interest free for up to 6 months with
Contact us for an ETA

Designed for professional musicians and studio engineers, this sturdy desk would suit the work flow of composers, recording, mixing and mastering engineers, as well as home studios.




Dispatch

SWAMP WS-100 Studio Production Mixing Mastering Desk Workstation
Designed for professional musicians and studio engineers, this sturdy desk would suit the workflow of composers, recording, mixing and mastering engineers, as well as home studios. 

Heavy Duty and Lots of Room
Strongly supported with a high gauge heavy duty metal frame, the WS-100 workstation desk contains 6U rack space on each side, totalling 12U. There are 2 bottom shelves for extra accessories or other heavy resources. There is also a back depth-adjustable shelf for your monitor.

Ergonomic Design
This desk offers exceptional ergonomics with room for outboard equipment, screens, controllers and keyboards. The easy to reach racks and the lower shelves are quite amenable for total control of your chosen workflow. With its elegant, minimalistic design, it will look great in any context. 

Features:

  • Cherry Wood MDF shelves
  • Ergonomic design
  • Dual 6U rack-mount slots, capacity 12U

Specifications:

  • Main shelf size: 182cm wide, 63cm deep, 79.5cm height. In the left and right part it is 37cm deep and the middle part is 50cm deep.
  • Back shelf for screen size: 72cm wide, 35cm deep, 73cm height.
  • Bottom shelf size: 45cm wide, 35cm deep, 41cm height.
  • Flat pack for freight - dimensions are: 190x70x16cm

Flat-pack item, assembly is required. Main wood shelves have no pre-drilled screw holes, a screwdriver for the included wood screws is required.

View PDF brochure for SWAMP WS-100 Studio Production Mixing Mastering Desk Workstation

It's good, but...

By: Matt on 28 May 2024
First I'll start with the positives - it's a great solid desk and looks good in my studio setup. Now the annoyances - firstly, mine only came with half the instructions, luckily the other half can be found on this page. Then I found out the hard way that there are 3 different types of brackets to connect the side sections. 2 look identical until you look closely, then you can see that one has been welded on a slight angle. I only noticed once I'd put the second shelf on that I'd used the straight bracket there instead of the angled one. So I had to pull the brackets off and swap them over (as well as taking the shelf off), which took about 20 minutes. Then another obvious annoyance, as the other reviewer mentioned, it doesn't come with rack hardware. For the amount of money you're spending on this desk, you'd think it would come with rack hardware. Anyway, I used some hardware from another Swamp rack, but the clips that the bolts go into wouldn't fit unless I turned them 90 degrees. Which became a problem when I tried to put one next to another one, it was near impossible to get one in without the other popping out. The last annoyance about the desk is that it doesn't come pre drilled, or even with indents for where the shelf screws should go. Which isn't a huge issue except that the shelves are so slippery that if you try and drill the screws straight in with the shelf in place, it moves straight away. So you have to mark the holes with a pen while the shelf is on, then take the shelf off to indent the board (or pre drill), then put it back on and drill the screw in. So while I think this is a great desk, it's a massive pain to put together, considering how much the desk costs. And yes, I am accustomed to building things, I just built my whole studio in my garage from the ground up, and I have a wife that loves to buy furniture from IKEA!
(4)

Best in Price Range

By: Anonymous on 14 October 2020
Great desk looks great in the room and has improved my work flow. The only downsides are i had to file out some of the slots to fit the caged nuts (which are not included) and it was poorly packed causing some pretty heavy scratching on the bottom of the legs (luckily not easily visible) and one of the screw mounts to bend (easily bent back with hammer and a block of wood)
(4)

Write a product review


MPN: AP-WS-100

ID: 146442