TAS-DP-006
A fantastic tool for anybody needing to easily record their song ideas. The TASCAM DP-006 is a digital music sketchpad that can record anywhere, for any instruments, and to transfer to your DAW software, or finish your mixes on board. Record up to 6 track
Loading... | ||||||
TASCAM DP-006 6-Track Digital Pocketstudio Multi-Track Recorder
A fantastic tool for anybody needing to easily record their song ideas. The TASCAM DP-006 is a digital music sketchpad that can record anywhere, for any instruments, and to transfer to your DAW software, or finish your mixes on board. Record up to 6 tracks.
Intuitive User Interface
The DP-006 has a user interface that enables intuitive operation similar to cassette MTR. Easy to operate, with recording preparation achievable in just two steps after turning the device on. A high-quality microphone is already built-in, so there is no need for an external mic.
Each track has a designated knob so that users can intuitively operate each track without having to rely on the screen. SD/SDHC cards are used for recording media, allowing data to be transferred to the computer via USB.
Anyone Can Use
Adding the DP-006 to your production setup will increase the scope of your music production infinitely. The music sketchpad can easily accumulate ideas and will capture that melody line as it pops into your head, all in high audio quality, further enhancing your music production.
Features:
- Up to six tracks recording (2mono tracks + 2mono/stereo switchable tracks)
- CD quality recording (44.1kHz/16-bit)
- Two tracks simultaneous recording/ six tracks simultaneous playback
- Dedicated stereo master track available
- Record to SD/SDHC card (Up to 32GB)
- 2 Built-in omni-directional condenser microphones
- Microphone sensitivity can be selected from 3-positions (Low/Mid/High)
- Two TS 1/4" mic/line inputs
- INPUT A can connect high-impedance instrument directly (Like an electric-guitar)
- Independent LEVEL/PAN(BALANCE) knobs for each track
- 15mW/ch headphone output
- 128 × 64 dot-matrix LCD
- Four AA batteries operation up to 9 hours (When recording, using the eneloop battery)
- Optional AC adapter ready (TASCAM PS-P520)
- Can connect to an external battery pack (TASCAM BP-6AA)
- Tripod screw hole
- Direct locate function by jog-wheel
- Repeat playback between IN/OUT point
- Track edit functions (CLONE TRACK, CLEAN OUT, SILENCE, CUT, OPEN)
- Bounce function allows recording of more six tracks
- UNDO/REDO (UNDO HISTORY) function
- Chromatic tuner and metronome included
- High-speed data transfer by USB2.0 connection
- Backup and restore songs
- File import/export by WAV format (mono/stereo)
- Export stereo master file as stereo WAV format
- 4GB SD card included
Specifications:
Built-in microphones | Omni-directional condenser microphone x 2 |
LINE OUT | |
Connectors | 3.5mm (1/8″) stereo mini jack |
Nominal output level | -10dBV |
Maximum output level | +6dBV |
PHONES | |
Connectors | 3.5mm (1/8″) stereo mini jack |
Maximum output level | 15mW+15mW or more (THD+N less than 0.1%, 32ohms loaded) |
USB | |
Connectors | USB Mini-B type 4-pin |
Format | USB2.0 HIGH SPEED mass storage class |
Continuous battery operation time | |
Alkaline battery (EVOLTA) | About 8H (Using line input/recording) About 8.5H (Using headphone/playback) |
Nickel-metal battery (eneloop) | About 9H (Using line input/recording) About 9.5H (Using headphone/playback) |
Power | Four AA batteries (Alkaline or nickel-metal battery) AC adapter (TASCAM PS-P520, sold separately) |
Power consumption | 1W(Maximum) |
Dimensions | 115(W) x 41.5(H) x 107(D)mm |
Weight | 360g(Without batteries) |
Operating temperature | 5-35˚C |
Backup memory | In the PREFERENCE, contents of “Repeat Int”, “Auto Pwr Save” and “Contrast” |
Accessories | 2GB SD card, AA battery x4, USB cable (80cm), Warranty card, Owner’s manual |
Be The First To Review This Product!
Help other SWAMP Industries users shop smarter by writing reviews for products you have purchased.