PowerWorks ARTEMIS 10" Powered Monitor 250W RMS

PowerWorks ARTEMIS 10" Powered Monitor 250W RMS
The ARTEMIS 10" 250W RMS / 500W Peak Powered Monitor. Constructed in a tough, plywood enclosure, this active speaker has a perfect small footprint. Fitted with high quality woofer and compression tweeter, and a clever designed crossover. Coaxial design.

Fantastic Live Foldback 
With the classic wedge design, small footprint, and the solid plywood enclosure, these wedges are proving to be excellent for vocals and instruments. The combination of Class D and Class A/B amplifiers deliver both a solid tight bottom end, crisp mid-range, and a warm high end that cuts through the stage sound with precision. The monitor wedge’s coaxial design, provides an even crystal clear sound reproduction. Easy to tune and EQ, these will guarentee excellent frequency delivery and under 15kg, easy to lug in and out of your gig.

Ideal Personal Monitor
The ARTEMIS 10" is an ideal personal monitor, for backing tracks, electronic drums kits and keyboards etc. With the low frequencies coming down to around 60Hz, it opens up a world of possibilities for monitoring during performances and rehearsals.

Versatile Monitor or FOH Speaker
The ARTEMIS Active monitors incorporate a switch to use as a Monitor or FOH (Front of House). All wedges of the ARTEMIS monitor series feature a very sturdy front grille design, two handles integrated on the side of the plywood cabinet and a 35mm pole mount on one side panel which allow for mounting of the monitor onto a tripod speaker pole to be used as FOH (Front of House).

• Active coaxial stage monitor for live and playback applications.
• Features a bass speaker (10″) and compression driver (1.35″) mounted on the bass speaker.
• The coaxial configuration allows perfect alignment of the acoustic centres of the speaker.
• The bass-reflex cabinet provides deep bass and high SPL
• Bi-amplification design with a high dynamic Class D amplifier delivering 200W RMS to the 10″ Speaker and a Class AB amplifier delivering + 50W RMS to the Compression Driver.
• Comes in a rugged Plywood housing with scratch-resistant multi-layered lacquer surface and an impact-resistant steel grille.
• Two ergonomic integrated side carrying handles.
• The monitor has 80 x 80 nominal coverage
• Also includes a 35mm flange for stand installation for FOH use.

• Frequency Response 60Hz – 18kHz
• Max SPL 121dB
• Low-freq. Transducer 10″ Woofer 2″ Voice Coil
• High-freq. Transducer 1″ Exit 1.35″ Compression Driver
• Coverage
• Low-Frequency Amplifier Class-D 400W
• High-Frequency Amplifier Class-AB 100W
• AC Mains 220/240V - 50/60Hz
• Power Consumption (Average/Peak) 250W / 500W
• Fuse T6.3AL-250V
• DSP
• Input Connections - 1x XLR/TRS Multicon connector,
• LINK Connectors - 1x XLR Link Output with Mono/Stereo selection
• Housing Material Plywood
• Grille Steel/1mm
• Flyable No
• Handles 2 – Integrated 1 on each side
• Tripod/Pole Hole Standard D35mm
• Speaker Size (WxHxD) 450 x 535 x 403mm
• Speaker Weight 14.08kg