Empress Effects Heavy Menace Distortion Guitar Effect Pedal

Empress Effects Heavy Menace Distortion Guitar Effect Pedal
The Empress Effects Heavy Menace Distortion Guitar Effect Pedal is incredibly versatile. One of the heaviest distortion tone colours available, it has an incredible high gain, 3 selectable modes, EQ system and quality noise gate built-in. Serious distort!

Enhanced EQ
The 3-band circuit on Heavy Menace is one of Empress Effects best ever. The weight control adjusts a high-pass filter in the distortion circuit to shape low-end character. Turn it up for a thick, full sound, or turn counterclockwise for a tight response that’s perfect for palm muting and extended-range guitars. Midrange is a key element of a great distorted sound, so the mid frequency is sweepable from 200 Hz to 2.5 kHz to dial in the sweet spot for your guitar and amp. Scoop for a tight, aggressive sound, or push to add definition and cut through a mix.

Adaptive Gate
Players loved the gate on the original Heavy. Envelope followers in the circuit respond to your playing, letting sustained notes decay naturally but clamping down quickly during fast stops. On the Heavy Menace, this gate is now footswitchable, with two available modes of operation. In normal bypass mode, the gate doesn’t affect the signal if the distortion is off, while independent bypass mode is like having separate distortion and gate pedals. Empress have also added a key input so you can optionally trigger the gate with an external signal. This is particularly useful if you have additional pedals before the Heavy Menace in your signal chain, such as a low-gain pedal for stacking. Split a clean signal with a pedal like their Buffer+ pedal and connect it to the Gate Key Input, and the gate will behave consistently regardless of changes at the main input.

Features:

• Three versatile distortion modes - Lite(ish), Heavy, and Heavier
• Footswitchable noise gate
• Three-band EQ with sweepable mid frequency
• Weight control to sculpt low frequency response
• Linked or independent switching of the distortion and gate
• Gate key input (⅛” TS or TRS)
• True bypass or buffered bypass
• All-analog signal path

Specifications:

• Input Impedance: 1MΩ
• Output Impedance: 100Ω
• Frequency Response (-3dB): 35Hz - 17kHz
• Input Voltage: 9VDC Centre-Negative
• Required Current: 250mA
• Power Input Connector: 2.1mm Barrel Connector
• Height (Enclosure Only): 3.8cm
• Height (Including Controls): 6.35cm
• Length: 12.2cm
• Width: 6.6cm
• Weight: 450g