BAR-JEVAL
The Baroni Jeval 150W Tube Guitar Amplifier is a hybrid beast, boasting a dual channel Tube preamp section consisting a hi-voltage ECC82 tube that enriches sound, dynamics and harmonic content, adding warmth and a tonal bottom-end response. Awesome tones.
Loading... | ||||||
Baroni Jeval 150W Tube Guitar Amplifier
The Baroni Jeval 150W Tube Guitar Amplifier is a hybrid beast, boasting a dual channel Tube preamp section consisting a hi-voltage ECC82 tube that enriches sound, dynamics and harmonic content, adding warmth and a tonal bottom-end response. Awesome tones.
Hybrid Amplifier
The Baroni JEVAL is a true 150W RMS Guitar Hybrid Amplifier that boasts a dual Channel TUBE Preamp section, featuring a hi-voltage ECC82 tube that enriches sound, dynamics and harmonic content, adding warmth and a huge bottom-end response typical of real Tube Amplifiers. The CALM channel is designed to recreate the warmth and brilliance of Vintage Amps of “blackface” era, and it’s the perfect companion to your pedalboard.
RAGE On!
The RAGE Channel, is designed after Baroni's award winning GURUS NINJA preamp pedal, which recreates the classic sound of Angriest hi-gain amplifiers. Baroni have fully recreated the behavior of a tube high-gain preamp section using a tube and a series of FETs configured to recreate up to Six gain stages to obtain a huge amount of gain. Both channels have separate tone stacks. Separate Gain and Volume for each channels, plus Master Volume and master Presence complete the palette of colors available to create your perfect sound. Regarding the amp format, Baroni thought let’s do something different…Let’s make a Desktop/ Cab Top amplifier.
Future of Guitar Amps
The JEVAL can fit on home studio’s desk, ready and waiting for you when you’re ready to record that killer guitar track. Also the JEVAL looks right on stage on top of your speaker cabinet. The wooden sides are easy detachable and let you use your JEVAL on your pedalboard as a pedal, featuring a classic footswitch on its top panel to switch between the channels. A Remote Switching socket on the rear panel, will work with any standard latching type footswitch, and let you change channels when using it as a desktop/ cab-top unit.
Specifications:
Main | Power Consumption Max 190 W |
Output Power | 150W rms @ 4 Ohm 75W rms @ 8 Ohm 40W rms @ 16 Ohm |
Dimensions | 220mm. (8,6”) x 130mm. (5,1”) x 35mm. (1,3”) |
Total power efficiency | PO= 150W – 82% THD +N @1Khz, full rated power, < 2% Output referenced idle noise - <91uV, A-weighted |
Dynamic range | A-weighted – 110db Bandwith: 20 Hz – 20Khz @ nominal power Presence +/- 6db @ 3,5 Khz |
Clean Channel Tonestack | Bass +/- 6db 60Hz Middle +/- 6db 620Hz Treble +/- 6db 6Khz |
Drive Channel Tonestack | Bass +/- 6db 60Hz Middle +/- 6db 680Hz Treble +/- 6db 5,5KHz |
Be The First To Review This Product!
Help other SWAMP Industries users shop smarter by writing reviews for products you have purchased.