PRO45
Audio-Technica's ProPoint hanging mics are an ideal solution for vocal speech, theatre, orchestra and choir sound reinforcement and recording. The installation of hanging mics have proved incredibly effective in many ways. Available in black or white.
Loading... | ||||||
PRO45 ProPoint Cardioid Condenser Hanging Microphone - Black
Audio-Technica's ProPoint hanging mics are an excellent choice for vocal speech, theatre, orchestra and choir sound reinforcement and recording. The installation of hanging mics have proved incredibly effective in many ways, especially if boom stand solutions are not an option, or to even address performer's lack of microphone technique. Mostly, as it has a high SPL, the suspension of these mics over choirs and orchestras makes it the ideal solution to get the best sonic source of your peformances. Available in black or white.
Hanging Mics and Easy Installation
The Pro45 features a robust construction and unobtrusive appearance. It has a wide-range condenser element with low-mass diaphragm for superior performance. Designed for easy installation, it has self-contained electronics which eliminate the need for external power modules. The 25' (7.6m) cable is permanently attached between the microphone and XLR(m)-type connector. As a cardioid condenser, the placement of these mics are very important to obtain the most pristine sonic source.
Features:
- Hi-SPL handling is ideal for suspension over choirs and orchestras
- Wide-range condenser element with low-mass diaphragm for superior performance
- Self-contained electronics eliminate need for external power modules
- Flat, smooth frequency response
- 25' (7.6m) cable permanently attached between microphone and XLRM-type connector
- Available in black (Pro45) and white (Pro45W)
Specifications:
Element |
Fixed-charge back plate, permanently polarized condenser |
Polar Pattern |
Cardioid |
Frequency Response |
70-16,000Hz |
Open Circuit Sensitivity |
-37dB (14.1 mV) re 1V at 1Pa |
Impedance |
100 ohms |
Maximum Input Sound Level |
134 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range |
106dB, 1 kHz at Max SPL |
Signal to Noise Ratio |
66dB, 1 kHz at 1 Pa |
Phantom Power Requirements |
9-52VDC, 2 mA typical |
Weight |
0.5oz (15g) |
Dimensions |
2.24″ (56.9 mm) long, 0.47″ (12.0mm) head diameter |
Output Connector |
3-pin XLRM-type on cable |
Cable |
25′ (7.6m) long, permanently attached |
Accessories |
AT8146(WH) windscreen; AT8451(WH) steel hanger |
Be The First To Review This Product!
Help other SWAMP Industries users shop smarter by writing reviews for products you have purchased.